Auburn Wire Works

DrivePad Shortcuts

Seamless automation, right out of the box.

DrivePad Shortcuts tie Link and App together through a collection of downloadable Apple Shortcuts and Automations. They handle automation tasks such as locking the iPad when the vehicle is turned off, automatically opening the DrivePad app, and managing screen brightness for day and night.

Download DrivePad Cam View Automation Setup
Important setup note Shortcut links install the action only. The iPad power triggers must be added separately in the Shortcuts app using the automation steps below.
KEY ON Power connected

Key On

Runs when vehicle power reaches the iPad. Raises brightness, disables Low Power Mode, and prepares the iPad for driving.

Get Shortcut
KEY OFF Power disconnected

Key Off

Runs when vehicle power is removed. Locks the iPad, dims the screen, pauses media, and parks the system.

Get Shortcut
REVERSE Reverse signal

Auto Reverse Control

Opens DrivePad Cam when DrivePad Link sends the reverse command, turning the iPad into the backup camera display.

Get Shortcut
20% Headlights on

Night Driving

Sets the iPad to about 20% brightness when the headlights are on, reducing glare during night driving.

Get Shortcut
90% Headlights off

Day Driving

Sets the iPad to about 90% brightness when the headlights are off, restoring clear daytime visibility.

Get Shortcut

Automation Setup

Connect Key On and Key Off to iPad power.

Apple requires the Charger triggers to be created on each iPad. Do this after installing the Key On and Key Off shortcuts.

Power connected

Use this for DrivePad Key On.

  1. Open Shortcuts.
  2. Tap Automation.
  3. Tap + and choose Charger.
  4. Select Is Connected.
  5. Choose Run Immediately.
  6. Add Run Shortcut.
  7. Select DrivePad Key On.

Power disconnected

Use this for DrivePad Key Off.

  1. Open Shortcuts.
  2. Tap Automation.
  3. Tap + and choose Charger.
  4. Select Is Disconnected.
  5. Choose Run Immediately.
  6. Add Run Shortcut.
  7. Select DrivePad Key Off.
Test before driving: Plug the iPad into vehicle power and confirm Key On runs. Unplug it and confirm Key Off runs. If either automation does not run, confirm Run Immediately is selected.